Angxun B660M-PLUS V0.1 Motherboard review: a cost-effective choice for non-K series

Angxun B660M-PLUS V0.1 Motherboard review: a cost-effective choice for non-K series

       Intel will launch non-K series processors in early 2022, along with B660 and H610 chipset motherboards. The price of 660M chipset motherboards is generally around 1,000 yuan, which makes many users reluctant to buy. However, Angxun recently launched a very affordable B660 chip motherboard, which allows many users with limited budgets to use the 12th generation Core.

Today, we bring you a new B660 Chipset Motherboard, which is Angthumb B660M-PLUS V0.1. First, the following parameters are supported：

▲Support for LGA 1700 Intel Core i9 / i7 / i5 / i3 / Pentium series processors

▲Support VGA & HDMI * 2 & DP synchronous four display

▲Support 2 M.2 (NVME protocol)

▲Support for 4 SATA interfaces

▲Support for high-speed DDR 4 dual-channel memory slot: support2133/2400/2666/3000 /3200MHz, The maximum capacity is 64G

▲Supports 6 USB3.0; 6 USB2.0

▲Support a 2.5G network card interface

▲Support 8 + 1 + 1 phase CPU power supply, 6 layer PCB

The AungXun B660M motherboard adopts the M-ATX board type, and the size of 24cm×18cm is well compatible with various small chassis. The motherboard provides 2 standard DDR4 memory slots, which can support memory overclocking. The motherboard adopts the LGA 1700 slot with the new design of the 12th generation Core. Since the B660 motherboard does not support the CPU overclocking function, users can directly choose non-K processors.

In terms of power supply, in addition to providing 24+8pin motherboard power supply, the AungXun B660M adopts a single 8pin design for CPU power supply. The motherboard adopts an 8+1+1 phase supply design. The core power supply of the motherboard adopts LOW.ESR Octopus MOSFET, ferrite inductor and Yubang all-solid capacitor.

The AungXun B660M motherboard provides a standard PCIe 5.0 x16 full-length slot, and also provides a PCIe x1 slot. The motherboard provides an M.2 solid-state hard disk slot that supports PCIe 4.0 channels, and at the same time, the motherboard I/O part provides a CNVi interface that supports wireless network cards, which is convenient for users to expand M2 wireless network cards. The SATA interface is located at the bottom of the motherboard, and  AungXun provides a total of 3.

In the I/O part on the back, AungXun B660M provides 2 HDMI, a VGA video interface, and a DP interface. Considering that HDMI monitors are already popular, providing an HDMI interface can meet the needs of 12-band Core processors that support core graphics. The motherboard has a PS/2 interface, four USB 2.0 interfaces, four USB 3.2 interfaces, and a Type-C interface, as well as an RJ45 network cable interface and three 3.5mm conventional audio interfaces.

The Angxun B660M motherboard uses the classic Realtek ALC 897 sound card. Through AungXun's high-specification production process and wiring design, it provides a signal-to-noise ratio that reaches the level of independent sound card sound effects. The front audio interface is located at the bottom of the motherboard, from left to right, they are audio interface, COM port, front USB 3.0, USB 2.0, and 12V. As a motherboard with a high cost-effective positioning, the AungXun B660M motherboard is a boon for players who have a limited budget but want to upgrade to the 12th generation Core, and the best price is very attractive.

Angxun has been in the motherboard industry for more than 20 years. Registered the brand Angthumb in many countries,we have focused on the production and research and development of intel motherboard,all in one motherboard,and Industrial motherboard,server motherboard etc.The website is : www.angthumb.com